Roof Installation in Lauderdale-by-the-Sea - Written Price, Workmanship Warranty

Fast, Reliable Roof Installation Across Lauderdale-by-the-Sea

Roof installation in Lauderdale-by-the-Sea runs $11,500 to $28,000 for a full replacement on a typical single-family home, with flat and low-slope TPO systems landing between $9,800 and $19,500 depending on decking condition and parapet work. That’s the honest range before anyone sets foot on your roof. We’re Mercer Roofing Co Fort Lauderdale, and we work on homes throughout Lauderdale-by-the-Sea every week. The salt air off the Atlantic decides what belongs on your roof more than any design preference, and we spec materials accordingly. Call (754) 354-1224 for a written estimate before any work starts.

Call (754) 354-1224

Why Mercer Roofing Co Fort Lauderdale Is Lauderdale-by-the-Sea’s Preferred Roof Installation Company

Homeowners in Lauderdale-by-the-Sea call us because we answer the phone and tell them the truth about coastal roofing. A live person picks up 24/7, not a voicemail. When we schedule a visit, you get the technician’s name and photo before they arrive. They show up in a clean uniform with a photo ID badge at the door. That’s the Threshold Verified standard, and it’s a contractual requirement for every technician we send. Grant Whitlock leads our team, and he holds every crew to that standard on every job in Lauderdale-by-the-Sea, from El Prado Park to the blocks south of Commercial Boulevard.

We’ve replaced roofs on mid-century concrete block homes with flat gravel tops, newer Mediterranean-style builds with barrel tile, and everything between. The reviews from Lauderdale-by-the-Sea customers mention the same things: the price didn’t change, the crew showed up when they said, and the written guarantee actually means something. Every repair we do carries a written guarantee and a free second visit if it fails. That’s the 365-Day Done Right Promise, and it applies to every roof we install or repair in Lauderdale-by-the-Sea.

Being local to this stretch of A1A matters. We know which building inspectors review permits here, what the HVHZ uplift requirements mean for your specific roof shape, and how the salt spray off the beach accelerates corrosion on exposed metal. An inland crew driving over for a one-off job doesn’t carry hot-dip galvanized fasteners as standard. We do. That’s the difference between a roof that lasts twenty years and one that leaks at year seven.

Roof Flashing Installation in Lauderdale-by-the-Sea

Roof flashing installation in Lauderdale-by-the-Sea is the waterproofing work where metal meets roof penetrations, parapet walls, chimneys, and skylights, and here it’s a corrosion war you’re fighting. Standard galvanized flashing lasts five to seven years on a beach block before the salt air eats through it. We install 24-gauge stainless steel flashing, sealed termination bars, and hot-dip galvanized ring-shank fasteners on every flashing job in Lauderdale-by-the-Sea. A typical flashing replacement on a flat roof parapet runs $2,400 to $5,800. A full re-flash alongside a roof tear-off adds $3,500 to $7,500 depending on linear footage and how many penetrations you have.

Parapet Wall Flashing and Termination

The 1960s built-up gravel roofs that dot the neighborhoods off El Mar Drive almost always fail at the parapet first. The original metal was galvanized, and after sixty years of salt exposure, it crumbles. We strip back to the concrete deck, install new underlayment over the repaired substrate, and cap the parapet with stainless steel flashing anchored with sealed termination bar. No exposed nails. No caulk that washes out in two seasons.

Pipe Boots and Vent Flashings

Small penetrations cause big leaks on Lauderdale-by-the-Sea roofs. The rubber boots around plumbing vents degrade faster in intense UV and salt than inland, cracking within three to five years. We replace every boot during a roof installation with a stainless or all-aluminum option, sealed at the base with a UV-stable elastomeric sealant. It’s a small line item, usually $180 to $420 per penetration, and it prevents the most common leak point on coastal homes.

TPO Roofing Installation in Lauderdale-by-the-Sea

TPO roofing installation in Lauderdale-by-the-Sea is our standard recommendation for flat and low-slope roofs on concrete block homes, and on a typical 1,600 to 2,200 square foot roof it runs $9,800 to $19,500 fully installed with tear-off. TPO is a heat-welded single-ply membrane that reflects UV aggressively, which matters when the sun beats on your roof eleven months a year. The white surface lowers roof temperature enough that your air conditioner works noticeably less. In this salt environment, TPO’s welded seams outperform adhesive-based systems when properly installed, and that’s exactly what we do.

Fully Adhered vs. Mechanically Attached TPO

Near the ocean, we almost always recommend a fully adhered TPO install rather than mechanical fastening. Fully adhered means we glue the membrane directly to the insulation or deck using a low-VOC adhesive, eliminating thousands of fastener penetrations that become corrosion points in salt air. It costs $1.50 to $3 more per square foot than mechanically attached, but on a beach block in Lauderdale-by-the-Sea that upcharge buys real decades of life. Mechanically attached systems rely on screws and plates, and those fail first here.

Heat-Welded Seams and Salt Contamination

Salt isn’t just a surface nuisance for TPO; it’s a welding contaminant. If a crew doesn’t clean the membrane overlap before heat-welding, the salt crystals prevent a true molecular bond, and the seam peels back within a few years. We wipe every seam with an approved cleaner before the welder touches it. That extra twenty minutes per seam is the line between a watertight roof and a callback. It’s non-negotiable on every flat roof we install in Lauderdale-by-the-Sea.

Trusted Brands We Service in Lauderdale-by-the-Sea

We install manufacturer-recognized shingle brands including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, and we stock the specific products that hold up in coastal South Florida. For Lauderdale-by-the-Sea flat roofs, we typically specify Owens Corning or CertainTeed insulation boards under our TPO membranes, and we carry the exact fasteners, sealants, and flashing metal those systems require. We don’t substitute whatever’s on the truck. If your roof needs a specific product, we order it and schedule around the delivery. For tile and metal roofs on newer homes, we work with Atlas and IKO components that meet HVHZ impact requirements. You’ll get a written line-item quote naming every material before we start, so you know exactly what’s going on your roof.

Common Roof Installation Problems We See in Lauderdale-by-the-Sea Homes

• Galvanic corrosion at dissimilar metal contact points. Stainless steel flashing installed with standard zinc-plated screws rusts through within five to seven years of beach exposure. The contact point between the two metals creates an electrical reaction in salt air that eats the fastener. We spec hot-dip galvanized or stainless fasteners that match the flashing metal, eliminating the mismatch.
• Premature TPO seam failure from salt contamination. Sea salt settles on the membrane surface and, if not cleaned before welding, prevents a proper bond. We see seams peel back on roofs where inland crews used the right material but skipped the surface prep. Every seam we weld gets wiped with the manufacturer’s approved cleaner first.
• Hidden salt damage to decking and hurricane clips. On mid-century homes in Lauderdale-by-the-Sea, the visible roof covering can look fine while the decking underneath is compromised. Rusted hurricane clips and corroded anchor bolts allow deck movement during storms, which leads to fastener back-out and leaks. During a tear-off, we inspect every clip and bolt and replace what’s rusted before any new roofing goes down.
• Parapet wall failure on 1960s built-up gravel roofs. Original gravel roofs off El Mar Drive and surrounding streets fail at the parapet wall flashing first. The galvanized metal corrodes, the seal cracks, and water wicks into the stacked mortar. Re-covering without addressing the parapet just moves the leak to a new spot. We rebuild the parapet cap and flashing as part of the roof installation, not after the first call for a ceiling stain.

Pricing for Roof Installation in Lauderdale-by-the-Sea, FL

We Also Serve Cities Near Lauderdale-by-the-Sea

Beyond Roof Installation in Lauderdale-by-the-Sea, our crews cover Roof Installation work throughout Fort Lauderdale, Pompano Beach, Sunrise, and Margate. The coastal conditions change street by street, and we apply the right spec for each block. If you’re just outside town limits, call and ask; we’re likely already working a roof down the street from you.

FAQs About Roof Installation in Lauderdale-by-the-Sea