Tamko Roof Installation Nationwide

Tamko Roof Installation in Fort Lauderdale: What to Know First

Tamko roof installation in Fort Lauderdale typically runs $6,800 – $14,200 for a standard single-family home, depending on the shingle line you choose and the condition of the decking underneath. We complete most Tamko tear-offs and full installs in three to five working days, weather permitting, and we put the written price in your hand before a single nail is driven. That price does not move once work starts, period.

Call (754) 354-1224

This page is for homeowners who either own a Tamko roof now and want to replace it with another Tamko system, or are considering Tamko for the first time and want straight answers about what holds up in South Florida heat and hurricanes. If you want to talk it through with a person right now, call (754) 354-1224. A live human answers, not a voicemail tree.

How Tamko Products Fail – and How We Fix Them

Every shingle brand has its own personality in the Florida sun. After handling Tamko installs across Fort Lauderdale for years, here’s what we see most often when a Tamko roof reaches the end of its life or fails early:

• Heritage series granule loss on south-facing slopes. Tamko’s Heritage architectural shingles are everywhere in Broward County, and on roofs with full afternoon sun exposure, the ceramic granules start sloughing off faster than the shingle itself deteriorates. You’ll see bald patches and granules filling your gutters. That’s not a manufacturing defect, it’s UV degradation combined with salt air. We fix it by stripping to bare decking and installing a fresh Tamko system with proper ventilation, because granule loss is almost always accelerated by poor attic airflow.
• Elite Glass-Seal sealant strip failures at the eaves. Tamko’s Elite Glass-Seal line has a thermal sealant strip that bonds the shingle tabs down. In Fort Lauderdale’s wet-dry cycling, we often find the bottom course at the eaves has let go, leaving shingles that lift in a breeze. Once the seal breaks, wind-driven rain gets underneath. Our fix on re-installation is a proper starter strip and hand-sealing the eave course where South Florida building practice calls for it.
• MetalWorks stone-coated steel delamination at fasteners. MetalWorks is a good product for coastal wind zones, but we’ve pulled up MetalWorks panels in Fort Lauderdale where the stone coating has chipped away around the screw heads. Why? Installers who overtorqued the fasteners. That cracks the stone layer and exposes the steel core to salt corrosion. As an independent Tamko service provider, we re-torque to spec and replace damaged panels with factory-matchedTamko pieces, never mismatched generics.
• Titan XT nail-line misses on steep rake edges. Titan XT is a heavier, larger-format shingle, and on the steep sections common in older Fort Lauderdale neighborhoods like Victoria Park and Rio Vista, we see installers miss the nail line on the rakes. Wind then gets under the shingle edge and peels the rake course. Our crews chalk the nail line on every Titan XT install and nail to the manufacturer’s pattern, no exceptions.
• Decking rot under Tamko roofs over pool cages. This one’s specific to South Florida. Homes with screened pool enclosures attached to the main roof often trap moisture where the cage meets the fascia. The decking rots under the shingles there even when the Tamko shingles above look fine. You don’t know it until the shingles get pulled. We mark any suspect areas during the estimate and photograph the decking when we open the roof, so you see exactly what we’re replacing and why.

Our Tamko Roof Installation Process

Here’s how a Tamko install goes with us, from first call to final walkthrough:

1. 1
   Call and conversation. A live person answers. We ask about your roof’s age, the Tamko line you have or want, and any leaks or visible issues. Then we schedule a no-pressure estimate.
2. 2
   The estimate visit. You get our technician’s name and photo before we arrive. At the door, he badges in with photo ID. He inspects the roof, attic ventilation, and decking, then puts a written, line-item price in your hands before he leaves.
3. 3
   Material selection. We walk you through Tamko’s lines, Heritage, Elite Glass-Seal, Titan XT, and MetalWorks, and recommend what fits your home’s pitch, exposure, and budget. We also stock GAF, Owens Corning, and CertainTeed, so if Tamko isn’t the right fit for your roof, we’ll tell you that plainly.
4. 4
   Tear-off and decking inspection. We strip the old roof, expose the deck, and photograph everything. If rotted decking needs replacement, we show you the photos and the per-sheet price before we proceed. No hidden change orders.
5. 5
   Installation to Tamko spec. Underlayment, flashing, starter strips, valley metal, and shingles all go on per the manufacturer’s installation instructions and current Florida code. We don’t cut corners on flashing or ventilation, because that’s where Fort Lauderdale roofs fail first.
6. 6
   Cleanup, inspection, and your written guarantee. We magnet-sweep for nails, inspect every slope, and hand you our 365-Day Done Right Promise in writing. If it’s not right within a year, we make it right.

What Tamko Roof Installation Costs in Fort Lauderdale

Here are honest ranges for Tamko installs we’ve done on Fort Lauderdale homes. Prices include tear-off of the existing roof, underlayment, flashing, and installation, but not decking replacement or permit fees, which vary by city and roof condition:

What moves the price: roof pitch and story height, decking condition, and whether your home is in a wind zone requiring upgraded fastening patterns. We give you the exact number in writing after the inspection, and that number is the number. Call (754) 354-1224 to schedule your free estimate.

Why Fort Lauderdale Homeowners Call Mercer Roofing Co Fort Lauderdale for Tamko Work

We know the stranger-at-the-door problem better than most people in this trade. You call a roofing company and some guy you’ve never seen climbs onto your roof. We built our whole process around fixing that. Every Mercer technician is background-checked, identity-verified, and photo-badged under the Threshold Verified standard, and you get the name and photo of exactly who’s coming before they pull into your driveway.

Beyond the badge at the door, we back every Tamko install with our 365-Day Done Right Promise. If it’s not right within a year, we make it right. We also work across all major shingle brands, GAF, Owens Corning, and CertainTeed included, so when you sit down with Grant Whitlock or any of our crew, you get a straight recommendation, not a sales pitch for whatever we have in the warehouse. A good roof shouldn’t be something you think about, that means we did our job right.

FAQs