Boral Roof Installation Nationwide

Boral Roof Installation in Fort Lauderdale: What to Know First

Boral roof installation in Fort Lauderdale typically runs $14,500 to $38,000 for a full replacement on an average single-family home, with concrete and clay tile profiles on the higher end of that range. We complete most Boral installations in three to six working days, depending on roof complexity and whether the underlying decking needs replacement. As an independent Boral service provider, we give you a written line-item price before any work starts, so you know exactly what you’re paying and why.

Call (754) 354-1224

This page is for Fort Lauderdale homeowners who either have Boral roofing now and need it replaced, or who are considering Boral for a new installation and want straight answers from a crew that actually works with the material. If your Boral roof is leaking or showing its age, call (754) 354-1224 and we’ll schedule a free inspection.

How Boral Products Fail – and How We Fix Them

• Cracked and spalled barrel tiles on older Boral Barcelona and Capistrano profiles. South Florida’s wet-dry cycles and intense sun cause hairline fractures that expand over time. Water seeps through the crack, then sits against the underlayment. In Fort Lauderdale’s humidity, that trapped moisture rots the felt faster than the tile itself ever fails. When we install new Boral, we replace the underlayment rather than overlaying, because the tile is only as waterproof as what’s beneath it.
• Loose or slipped tiles from uplift on Boral flat-profile tile roofs. Boral’s flatter profiles, like the Villa and Slate lines, catch less wind than barrel tile, but their interlocking tabs wear down over decades. We see this most often on homes east of US-1 where coastal gusts channel between buildings. We re-set tiles with new fasteners and, on re-installation, add proper field clip counts along eaves and ridges to meet current Miami-Dade wind standards.
• Faded glaze on Boral’s through-body color tiles is cosmetic, but cracked ones are not. Boral tile is through-body colored, so fading doesn’t expose a different base. What we actually watch for is a dull, chalky surface paired with visible micro-cracks along the waterline of the barrel. That combination means the tile has absorbed water too many times and is now a path for moisture, not a shield. We replace individual tiles when the break is isolated; if cracks run in bands across a slope, we quote full-section replacement.
• Streaking from failed underlayment rather than the Boral tile itself. Homeowners see dark lines on ceilings and assume the tile is bad. More often, the field portions of the tile are fine and the underlayment has torn at a valley or penetration. We strip the affected area, inspect the wood decking below, and install a modern synthetic underlayment that holds up better than older felt in Fort Lauderdale’s heat and afternoon downpours.
• Bird and rodent entry at eaves and hip junctions on Boral roofs with open rake edges. Boral’s profile creates natural gaps at certain trim details. Critters exploit those spaces, and once they’re in, the weight of nesting material traps water against the decking. We install bird stop at eaves and mortar wash closures at hips and ridges during our Boral installations, which closes those entry points without changing the roofline’s appearance.

Our Boral Roof Installation Process

1. 1
   Free inspection and moisture assessment. We spend time on your roof, not just in the driveway. We check tile condition, underlayment, flashing, and the decking beneath. We also look for the specific Boral failure patterns we listed above.
2. 2
   Written line-item quote. Before any work starts, you get a written price covering materials, labor, fasteners, disposal, and any decking or flashing replacement we found during inspection. No verbal estimates, no handshake deal, no surprises on the final invoice.
3. 3
   Material ordering and staging. We order Boral tile in the matching profile and color batch. We store it on-site carefully, because Boral tile is color-matched by production lot and you don’t want mixed batches on a visible slope.
4. 4
   Strip, assess, and prep. We remove old tile, inspect the deck closely once it’s exposed, and replace anything soft or delaminated. Then we lay the new underlayment and flash every penetration, valley, and transition the right way.
5. 5
   Tile installation and finish work. We lay Boral tile to manufacturer specifications, fasten per current wind-load standards, and close all ridge, hip, and eave details with the correct closures. Your roof should look tight and even from every angle.
6. 6
   Cleanup and walkthrough. We magnet-sweep for nails, remove all debris, and walk the roof with you before we leave. Every installation is covered by our 365-Day Done Right Promise in writing.

What Boral Roof Installation Costs in Fort Lauderdale

Here are realistic ranges for Boral roof installation on Fort Lauderdale homes. These are not bid-engine numbers; they reflect what we write into actual quotes.

• Full replacement, concrete Boral tile (Villa or Flat profile), 1,800 sq ft home: $16,000 to $24,000
• Full replacement, clay Boral tile (Barcelona or Capistrano profile), 1,800 sq ft home: $24,000 to $36,000
• Partial replacement (one slope, matching existing tile): $4,500 to $9,500 depending on slope size and access
• Underlayment replacement only (tile re-used): $7,000 to $12,000 for an 1,800 sq ft roof
• Decking replacement, per 4×8 sheet: $85 to $145 depending on plywood grade

What moves the price: roof pitch, number of hips and valleys, whether we need a crane for material staging, and how much decking has rotted from years of South Florida humidity. The quote you get is the price you pay. Call (754) 354-1224 for a free estimate with exact numbers for your home.

Why Fort Lauderdale Homeowners Call Mercer Roofing Co Fort Lauderdale for Boral Work

You’ll know exactly who is walking up your driveway. When you book with us, we send the technician’s name and photo before they arrive. They show up in a clean, marked uniform, badged, and background-checked under the Threshold Verified standard. That’s not a sales phrase; it’s a contractual requirement for every visit to your home.

Every Boral job we quote comes with the same plain-words guarantee: if it’s not done right within 365 days, we make it right. That’s the 365-Day Done Right Promise, and we put it in writing with every installation. We also work across the full range of shingle brands including GAF, Owens Corning, and CertainTeed, so if Boral isn’t the best fit for your roof or budget, we’ll tell you and show you options instead of pushing one product. Grant Whitlock, our owner, has spent over two decades on real roofs, from flat membrane work near Las Olas Boulevard to tile replacements across Broward County. He’s the guy who will tell you straight whether to repair or replace, and he’ll put the numbers in writing before a single nail goes down. A good roof shouldn’t be something you think about, and that means we did our job right.

FAQs