Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Installation Across Dania Beach
Roof installation in Dania Beach typically runs $7,800 to $22,500 depending on the roof system, footprint, and what the decking reveals once we open it up. Most full re-roofs on the older 1950s-1970s homes near Federal Highway take 2 to 5 working days, and we provide a written price before any tear-off starts. Dania Beach sits entirely inside Miami-Dade County’s High-Velocity Hurricane Zone, so every installation we do follows stricter nailing patterns and uplift-rated attachments than work across the Broward line. If you’re pricing a new roof, call (754) 354-1224 and we’ll give you real numbers for your street, your roof shape, and your home’s age before you commit to anything.
Why Mercer Roofing Co Fort Lauderdale Is Dania Beach’s Preferred Roof Installation Company
Dania Beach homeowners call us because we solve the problem most roofers ignore: the stranger-at-the-door risk. Every technician’s name and photo is sent to you before the visit. When someone knocks, they arrive in a clean, marked uniform and present a photo ID badge at your door. No unannounced crew, no unmarked truck, no mystery. That’s the Threshold Verified standard, and it applies to every installation we run from the canals east of Federal Highway to the neighborhoods west of I-95.
We’ve installed roofs on mid-century ranch homes off SE 3rd Avenue, barrel-tile canal properties near Dania Beach Boulevard, and newer construction closer to Griffin Road. Each job starts the same way: a full inspection, a written line-item price, and a discussion about what the permit will trigger once we expose the decking. Our Roof Installation team includes crews who understand Miami-Dade HVHZ code the way a Dania Beach inspector expects to see it applied, not the looser standard you find in Broward. That’s local expertise, not a brochure line. Grant Whitlock leads the operation, and his standard is simple: the price you approve is the price you pay, and the work is covered by our 365-Day Done Right Promise in writing.
Styles & brands we work with
Standing Seam Metal Roof in Dania Beach
Standing Seam Metal Roof installation in Dania Beach is the strongest answer to salt air, wind-driven rain, and hurricane uplift. The system uses vertical metal panels with concealed fasteners running from eave to ridge. No exposed screws along the water lines, which matters on canal-front homes where marine spray eats standard fasteners within a decade. A full standing seam roof for a typical 1,400-square-foot Dania Beach home runs $14,000 to $22,500, depending on decking condition and roof complexity.
Hidden-fastener panels for salt exposure
The concealed fastener design keeps the attachment system out of the weather. On properties within a quarter mile of the Intracoastal or the Atlantic, we see exposed fasteners on older metal roofs corroded down to nubs inside eight years. The standing seam profile removes that failure point and meets HVHZ uplift requirements with manufacturer-rated clips, not field-caulked screws.
Why it works on low-slope canal roofs
Standing seam handles low pitches well when installed over a properly detailed underlayment. Many Dania Beach canal homes carry roofs that shed water slower than a steeper Broward gable. We design the panel layout and underlayment system for that reality, including self-adhered membrane at valleys and penetrations where standing water tends to sit after a summer downpour.
Tile Roof in Dania Beach
Tile Roof installation in Dania Beach means working with the barrel tile and flat tile profiles that define so many of the city’s mid-century homes. A tile system adds real weight, so a replacement usually triggers a structural check of the original 1950s-1970s decking and framing. Full tile roof installation on a Dania Beach home typically runs $16,500 to $24,000, with the higher end reflecting canal-front properties where we replace rotted plywood, rusted valleys, and failed underlayment before any tile goes down.
Re-decking before the tile goes on
We don’t lay new tile over compromised decking. The original spaced board sheathing and 3/8-inch plywood common in Dania Beach’s older housing stock often fails under HVHZ uplift once the old fasteners have spent forty years in salt air. When we pull back a barrel-tile roof and find that condition, we replace the decking to current Miami-Dade code, re-nail to the uplift schedule, and document it before the inspector arrives.
Valley and flashing replacement on canal homes
The barrel tile and metal valleys on canal-front homes rust out from wind-driven rain and marine spray, letting water migrate under the tile and delaminate the fascia. On a 1960s barrel-tile home off SE 3rd Avenue near the canal, our crew pulled back the original decking and found exactly that: rusted-out metal valleys and water damage behind the fascia. We cut allowances into the contract, replaced the failed decking and dry-rotted framing, upgraded to a self-adhered ice and water shield, and reinstalled Boral tile over a secondary water barrier, all approved in writing before we touched a single square.
Trusted Brands We Service in Dania Beach
We install and repair roofs using manufacturer-recognized shingle and tile systems, including CertainTeed, Owens Corning, IKO, and Atlas. When a Dania Beach homeowner has a preference for a specific brand, we price it honestly and order from local South Florida supply houses so lead time stays short. We don’t push one brand over another; we match the system to the roof’s exposure, pitch, and the HVHZ requirements that apply on every Dania Beach permit. Roof Installation in Dania Beach comes down to the right product, correctly installed, with every warranty in writing before we start.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Installation Problems We See in Dania Beach Homes
- Rotted decking hidden under intact tile. The original 3/8-inch plywood or spaced board sheathing on 1950s-1970s homes fails long before the tile above it shows damage. By the time a leak stains the ceiling, the decking around the penetration is usually saturated and needs full replacement.
- Rusted metal valleys on canal-front properties. Wind-driven rain and marine spray corrode valleys and flashings faster than the rest of the roof. Water migrates under the tile, delaminates the fascia, and rots the soffit before anyone notices from the ground.
- Standing water on flat and low-slope sections. Older flat roofs trap water after summer afternoon thunderstorms. The underlayment saturates, the decking rots around penetrations, and the leak inside the house shows up months after the damage began.
- Code triggers once the decking is opened up. Any Dania Beach roof replacement that exposes the decking triggers current HVHZ requirements: nail schedule, uplift straps, underlayment spec. Homes built before those codes existed often need structural retrofits that a generic roofing quote won’t include.
Pricing for Roof Installation in Dania Beach, FL
Here’s what Dania Beach homeowners should expect in real dollars. A basic shingle re-roof on a 1,200 to 1,600 square foot home runs $7,800 to $11,500. Standing seam metal lands between $14,000 and $22,500 for typical footprints. Tile systems run $16,500 to $24,000, with the upper range reflecting canal-front homes where decking, valleys, and framing need replacement before the finish roof goes on. What moves the number: decking condition, roof complexity, pitch, and the code upgrades a permit triggers once we open the roof. We write every allowance into the contract, so surprises are priced and approved in writing before we touch them. Call (754) 354-1224 for a free estimate with line-item pricing.
We Also Serve Cities Near Dania Beach
Mercer Roofing Co Fort Lauderdale installs roofs across Dania Beach and the surrounding South Florida cities, including Fort Lauderdale, Pompano Beach, Sunrise, and Margate. Every installation in the area follows the same threshold: written price first, photo ID at the door, and a 365-Day Done Right Promise on the work.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Dania Beach
Once the decking is exposed on a Dania Beach home, the inspector holds the roof to current Miami-Dade HVHZ code, even if the home was built in 1962 and never required it before. That means the existing nail schedule, uplift-rated attachments, and underlayment spec all come under review. An older roof with 3/8-inch plywood and spaced fasteners usually needs re-nailing, new decking, and sometimes hardware retrofits at the truss connections. We identify these triggers during the estimate and write the allowances into the contract so the permit inspection doesn’t become a financial surprise. Call (754) 354-1224 to have your roof evaluated against current code before you commit to a number.
Canal-front homes east of Federal Highway carry failure modes that newer construction west of I-95 simply doesn’t have. Salt air accelerates corrosion on fasteners, flashings, and metal valleys. Wind-driven rain pushes water behind fascia boards and under tile in ways that a inland lot never experiences. And the original decking on those older canal properties is frequently 3/8-inch plywood or spaced board sheathing that fails under HVHZ uplift, so we’re replacing structure, not just shingles. The higher price reflects the canal-specific work, not a markup for the view. For an exact quote on your canal home, call (754) 354-1224.
Yes. We convert barrel tile roofs to standing seam metal on mid-century Dania Beach homes regularly, and the process starts with a structural check. Barrel tile is heavy, so the framing underneath is usually robust enough to carry a standing seam profile. We strip the tile, replace the decking and any failed framing, install a self-adhered underlayment, and run the metal panels with concealed fasteners. The finished roof weighs significantly less and shrugs off salt air. If you’re considering the switch, we’ll price the conversion in writing, including all decking and code work, before any tear-off begins.
For flat and low-slope roofs in Dania Beach, we use self-adhered membrane systems rated for high-heat and standing water exposure, not the cheaper nail-down felt that fails after a few summer seasons. On the flat sections common to older Dania Beach homes, the underlayment is the roof: it’s the primary water barrier. We run the membrane up penetrations, protect the valleys, and detail the transitions where a flat section meets a pitched slope. The spec is written into every contract, and the Miami-Dade HVHZ rating is what determines the product, not a brand preference. Call (754) 354-1224 to discuss your specific roof shape.
We build allowances into the contract for decking and framing, labeled with a per-sheet and per-linear-foot price so nothing is vague. When we open the roof and find rot, failed fasteners, or truss damage, we document it in photos, show you what we found, and get written approval before any repair goes forward. If the decking is worse than the allowance covered, we price the difference in writing on the spot and you approve it or we stop. There is no change order that appears after the work is done. That’s how Grant Whitlock runs every Dania Beach installation, and it’s why our final invoices match the contract. Call (754) 354-1224 for a free estimate with allowances written in from day one.
Written by Grant Whitlock, Owner at Mercer Roofing Co Fort Lauderdale, serving Dania Beach and the surrounding South Florida coast.