Tamko Roofing Company Nationwide

Tamko Roofing Company in Fort Lauderdale: What to Know First

If you own a Fort Lauderdale home with a Tamko roof and need repairs, replacement, or an honest inspection, we can help. Mercer Roofing Co Fort Lauderdale provides independent Tamko roofing services across Broward County, with most repairs completed in a single visit once parts are confirmed and a written price is in your hands before any work begins. Expect straightforward pricing: a repair typically lands between $350 and $900 depending on what’s failing, while full Tamko replacements in this area usually run $11,000 to $19,000 depending on size and decking condition.

Call (754) 354-1224

This page is for Tamko owners who want specifics, not a sales pitch. You’ll learn which Tamko lines show up on Fort Lauderdale roofs, how they fail in our heat and humidity, what fixes cost, and why our process is different from every other roofing company you’ll call for Tamko work. As an independent Tamko service provider, we’re not affiliated with the manufacturer, which means we can give you the straight answers a warranty brochure never will.

If your roof is leaking or you’re budgeting for a replacement, call us at (754) 354-1224 and a live person answers.

How Tamko Products Fail – and How We Fix Them

Every shingle brand has its own fingerprint for failure in South Florida. Here’s what we actually see on Tamko roofs in Fort Lauderdale, and what we do about it:

• Heritage Series granule loss after tropical storms. Tamko’s Heritage line is common on Fort Lauderdale homes, and after a strong storm season we regularly find patches where granules have stripped away, leaving the asphalt layer exposed to UV. Granule loss accelerates aging fast. We don’t just patch over it; we identify whether the underlayment is still protecting the decking, then replace affected courses and match the color as closely as the current Tamko dye lots allow. Sometimes we’ll tell you honestly that a full tear-off is the smarter money.
• StormFLEX and Laminated Shingle wind-lift at the eaves. Tamko laminated shingles, including StormFLEX, rely on a proper seal strip to lock down against wind. The nail line and seal strip on Tamko shingles sit a bit higher than some other brands, which means a careless installer can set nails above the seal strip without realizing it. The shingle looks fine for a year, then starts flapping in the first serious wind event. We see this all over Broward County. Our fix involves re-nailing at the correct position, not just re-sealing, because if the nails are wrong, new sealant won’t hold through the next storm.
• Elite Glass-Seal algae streaking on north-facing slopes. Fort Lauderdale’s humidity feeds algae growth, and Tamko’s Elite Glass-Seal shingles still show streaking on slopes that never get direct sun. That dark staining isn’t just cosmetic. Over time, algae holds moisture against the shingle surface and shortens its life. We treat it with the right cleaner and, if the decking is sound, often recommend a fresh underlayment while we’re up there. The team at GAF-certified crews might sell you a new roof; we’d rather tell you if yours has five good years left.
• MetalWorks steel shingle fastening issues in coastal air. Tamko MetalWorks steel shingles can corrode at the fastener points in salt-heavy air near Las Olas and the barrier island. The steel itself holds up, but the fasteners and the rubber washers at each panel degrade faster than inland roofs. We’ve opened up sections where the panel looked perfect from the ground but the fasteners had rusted to powder underneath. The fix is replacing fasteners with properly rated alternatives and checking the whole slope so you don’t end up with panels lifting in the next storm.
• Ventilated ridge cap wear on older Heritage installations. On Tamko roofs from the early 2010s in Fort Lauderdale, we often see the ridge cap shingles cracking before the field shingles show any sign of trouble. The cap takes the full brunt of heat and wind from multiple angles, and older cap shingles just weren’t as thick. We replace ridge caps as a targeted repair when the field is sound, and we always match the profile so water sheds over the cap the way it should.

Our Tamko Roofing Company Process

Here’s how a Tamko job runs with us, start to finish:

1. 1
   You call (754) 354-1224. A live person answers. No voicemail tree, no call-back form, no “press 2 for new customers.” Just a human who asks the right questions.
2. 2
   We send a technician whose name and photo you receive before they arrive. They show up in a clean, marked uniform with a photo ID badge at the door. You always know exactly who’s walking up your driveway, because their name and face were sent to you first.
3. 3
   The inspection is specific to Tamko. We check the seal strips, nail placement, granule condition, flashing points, and decking, not just surfaces. If it’s a Tamko shingle roof, we’re looking for the failure patterns that Tamko roofs specifically develop in Fort Lauderdale’s climate.
4. 4
   You get a written price before any work starts. We walk you through what we found, what needs to happen, and exactly what it will cost. If a repair makes more sense than a replacement today, we’ll say so, and the numbers will be in writing.
5. 5
   We do the work with the right parts. Where an OEM Tamko component is available and compatible, we use it. Where a quality aftermarket part is the smarter engineering call for our climate, we explain why before we install it. You’re never guessing what went on your roof.
6. 6
   We test, we document, and we guarantee it. Every repair is covered by a written guarantee from Mercer Roofing Co Fort Lauderdale. If the repair fails within 365 days, we come back and make it right, at no charge. That’s the promise we put in writing on every job we do.

What Tamko Roofing Company Costs in Fort Lauderdale

Here’s what you should expect to pay for common Tamko work in Fort Lauderdale, based on what we’ve seen and billed across Broward County:

• Small targeted repair (replacing a few lifted or cracked shingles, re-sealing flashing): $350 – $500
• Valley or flashing repair (leak at a valley, chimney, or wall intersection on a Tamko roof): $500 – $900
• Ridge cap replacement on a single-story home: $400 – $750
• Underlayment replacement on one slope (shingles lifted and reset): $1,200 – $2,800
• Full Tamko tear-off and replacement on a typical Fort Lauderdale home: $11,000 – $19,000, varying with square footage, decking condition, and the Tamko line you choose (Heritage vs. StormFLEX vs. Elite Glass-Seal)

What moves the price? Decking condition is the biggest wild card. If the plywood under your shingles is rotten from years of slow leaks, that’s additional material and labor before new shingles go down. The roof’s pitch and whether it’s a two-story make a difference, too, because safety equipment and time change. The important thing: you’ll get a written price before any work starts, and the number on the invoice will match the number you approved. Call (754) 354-1224 for a free estimate on your Tamko roof.

Why Fort Lauderdale Homeowners Call Mercer Roofing Co Fort Lauderdale for Tamko Work

There are roofing companies in Fort Lauderdale who can put shingles on a roof. There are far fewer who can tell you that your Heritage shingles lifted because the original installer nailed above the seal strip, or that your MetalWorks fasteners are corroding from the inside out. That’s the difference our technicians bring, and it’s a difference built on more than two decades of diagnosing real roofs in real Florida weather. Grant Whitlock, our owner, learned roofing through the construction technology program at Los Angeles Trade-Technical College and has spent the years since applying that education to thousands of roofs, from flat membrane repairs near downtown to full tile replacements across Broward County. He’s the kind of owner who will tell you if a repair will hold another five years or if you’re better off budgeting for a full replacement now, and he’ll put the numbers in writing before anyone picks up a nail gun.

But here’s what matters most for you: the stranger-at-the-door problem. When you call us for Tamko work, we send you the technician’s name and photo before they arrive. When they ring your bell, they show a photo ID badge. They’re background-checked, identity-verified, and dispatched under the Threshold Verified standard, which our location is contractually held to as part of the Threshold Group family of home-service companies. If the Tamko part we need has a lead time, we’ll tell you. If a GAF, Owens Corning, or CertainTeed product is the better fit for a repair or a full replacement, we’ll say that too, because we work with all of those brands and we’re not tied to one manufacturer’s line. A good roof shouldn’t be something you think about, that means we did our job right.

FAQs