Tamko Roof Repair Nationwide

Tamko Roof Repair in Fort Lauderdale: What to Know First

Tamko roof repair in Fort Lauderdale typically costs between $425 and $1,850 depending on whether you’re dealing with a single shingle replacement, a leak around flashing, or valley damage from a summer storm. Most Tamko repairs we handle take one visit of three to six hours, and we’ll always give you a written price before any work starts. If you own a Tamko roof and you’re seeing granules in your gutters, a water stain on the ceiling, or lifted shingles after a wind event, you need an independent Tamko service provider who knows these particular shingles well. That’s us. Call (754) 354-1224 to schedule a free estimate.

Call (754) 354-1224

How Tamko Products Fail – and How We Fix Them

• Heritage shingle granule loss near drip edges. Tamko’s Heritage line shows up on a lot of Fort Lauderdale ranch homes, and we see premature granule shedding when the roof decking wasn’t ventilated properly at the eaves. South Florida attic heat cooks the adhesive from underneath. We fix it by replacing the affected shingles and checking whether your soffit vents are actually pulling air. If they’re not, we’ll tell you before we touch a shingle, because new shingles on a hot attic will shed the same way.
• Elite Glass-Seal shingles lifting at the nail line after tropical-storm winds. This is a Tamko-specific pattern. Elite Glass-Seal shingles have a wider nail zone than many competitors, but if the original installer nailed high and shallow, the shingle flaps at 45 mph. We catch this on leak calls where the homeowner swears the roof “looks fine.” The fix is a re-nail and seal at the correct depth, plus replacement of any shingles that already cracked at the bend.
• MetalWorks stone-coated steel panels scratching at overlapping seams. Tamko’s MetalWorks line is popular on newer Fort Lauderdale builds, and the biggest repair call is seam wear. The stone coating is tough, but overlapped panels rub in high wind and the grit thins out. Once the underlying steel is exposed near salt air, it starts to pit. We touch up the seam with a matched coating and, when the panel is too far gone, replace the single panel instead of the whole field.
• Flashing failure around vent pipes and chimneys. This isn’t exclusive to Tamko, but it’s the number one source of Tamko roof leaks we trace. The shingles themselves are usually fine. The original flashing was either nailed wrong or never replaced when the shingles were. On Tamko jobs we always pull the old flashing, inspect the boot, and set new flashing in sealant rated for South Florida UV.
• Valley damage from branch strike or heavy runoff. Fort Lauderdale’s live oaks and sudden downpours are rough on valleys. Tamko shingles in a valley take more water volume than the manufacturer’s spec assumes, especially on low-slope sections. We see granule loss and cracking concentrated right in the valley center. Our fix is to replace the valley shingles with a heavier underlayment beneath them, because the problem is often the layer under the shingle, not the shingle itself.

Our Tamko Roof Repair Process

1. 1
   You call, a person answers. We pick up 24/7. You’ll describe the problem, and we’ll schedule a time that works. Before the technician arrives, you’ll get their name and photo by text or email, so you know exactly who is at the door.
2. 2
   The technician badges in. Every Mercer technician carries a photo ID and arrives in a marked uniform. They’ll walk the roof, take photos, and show you what they found. No mystery diagnoses.
3. 3
   You get a written price. We tell you what’s wrong, what it costs to fix, and what parts we’re using. If the repair can wait five years, Grant will tell you that too. No work starts until you approve the number in writing.
4. 4
   We make the repair. We match your Tamko shingles by model and color, using OEM pieces when the line is still in production and quality aftermarket equivalents when it’s not. We’ll explain the difference before we order.
5. 5
   We test the fix. For leak repairs, we run water on the area and confirm the leak is gone before we climb down.
6. 6
   You get the guarantee in writing. Every Tamko repair carries our 365-Day Done Right Promise. If the repair fails within a year, we come back and make it right at no charge.

What Tamko Roof Repair Costs in Fort Lauderdale

Here are the numbers we quote most often for Tamko work in Fort Lauderdale:

• Single shingle replacement: $425 to $625, including the shingle, sealant, and labor.
• Leak repair at flashing or vent boot: $550 to $950, depending on how much flashing needs to be pulled and reset.
• Valley repair (3 to 6 linear feet): $700 to $1,400, including new underlayment in the valley channel.
• Partial roof section replacement (100 to 200 square feet): $1,250 to $2,600, including tear-off of the damaged section, new underlayment, and Tamko shingles matched by color.
• Flat roof patch on a Tamko membrane section: $500 to $1,100, depending on membrane condition and patch size.

What moves the price is the roof’s pitch, whether we’re working around a chimney or skylight, and whether the decking underneath is rotted from a long-running leak. We’ll show you the rotted decking before we quote it. Estimates are free. Call (754) 354-1224 to get a written number for your specific roof.

Why Fort Lauderdale Homeowners Call Mercer Roofing Co Fort Lauderdale for Tamko Work

Most roofers can nail a shingle. What they can’t always do is make you comfortable opening the door. We send you the technician’s name and photo before they arrive. They badge in at the door. You get a written price before a single nail is driven, and every repair comes with our 365-Day Done Right Promise in writing. If it’s not right within a year, we make it right. We also service GAF, Owens Corning, and CertainTeed roofs, which means if your Tamko repair reveals damage on a mixed-brand addition, one call covers it. Grant Whitlock has been straight with Fort Lauderdale homeowners for years, the kind of straight where he’ll tell you if a repair will hold five more years or if you’re better off budgeting for a full replacement. A good roof shouldn’t be something you think about, and our job is to get you back to not thinking about it.

FAQs