Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Gutter Replacement: The Fort Lauderdale Owner’s Guide
Replacing IKO gutters in Fort Lauderdale typically costs $8 to $14 per linear foot installed, with most single-story homes running between $1,200 and $2,600 for a full gutter replacement using seamless aluminum matched to your IKO roof system. We stock IKO-compatible gutter profiles and hangers on our trucks, so most replacements in the Fort Lauderdale area are completed in a single visit. You’ll usually know it’s time when you spot gutters pulling away from the fascia after a heavy afternoon storm, or when water cascades over the front edge instead of flowing toward the downspout. In Fort Lauderdale, where a summer afternoon can dump two inches of rain in an hour, a failing gutter stops being a small annoyance and starts working against your foundation, your soffit, and the fascia board the gutters hang from. Grant Whitlock has replaced enough IKO gutter systems across Broward County to know the exact failure points before the first ladder goes up.
Which IKO Models This Applies To
IKO doesn’t manufacture gutters under its own brand name, so when Fort Lauderdale homeowners ask about “IKO gutter replacement,” they’re usually talking about the gutter system installed alongside their IKO shingle roof: most commonly IKO Cambridge, IKO Dynasty, or IKO Nordic architectural shingles paired with either aluminum or vinyl gutter runs. The matching question that matters is your gutter profile and material, not the shingle line. The standard for South Florida homes built from the late 1990s forward is 5-inch K-style aluminum, and that’s what we stock most. Older Fort Lauderdale homes near Victoria Park or Sailboat Bend sometimes have 4-inch profiles or steel half-round gutters that were common in mid-century construction, and those need a different hanger spacing and bracket set. When you look at the underside of an existing gutter section, you’ll usually find a stamped gauge number: .027 is builder-grade aluminum that lasts 12 to 18 years in South Florida’s salt air and sun, while .032 holds its shape longer and resists the sag you see between hangers. We recommend .032 aluminum for any Fort Lauderdale home within three miles of the ocean, because salt spray accelerates the pitting that turns pinhole leaks into split seams. As for OEM versus aftermarket: since IKO’s gutter products are distributed regionally rather than made by IKO, quality aftermarket equivalents from names like Spectra and Senox match or beat the original profile dimensions. We’ll tell you when a generic 5-inch K-style run is identical to what’s already on the house, and when it’s worth paying more for a heavier gauge.
Styles & brands we work with






Signs Your IKO Gutter Replacement Is Failing
- Water spilling over the front lip during normal rain. This usually means the gutter slope has gone flat from loose hangers, or the downspout is choked with roof grit and seed pods from your neighbor’s live oak. The fix isn’t always full replacement, but it always starts with putting a level on the run.
- Gutters pulling away from the fascia, especially at corners. The fasteners have stripped out of the wood, and every hard rain pries them further. Left alone, the weight of a water-filled gutter eventually yanks the fascia board with it, and then you’re paying for fascia repair on top of gutter work.
- Pinhole leaks or visible rust streaks along the gutter bottom. Aluminum doesn’t rust, but it does pit and corrode in Fort Lauderdale’s salt air. Once pinholes appear, patching buys you a season, not a solution.
- Staining on the soffit or the top of the exterior wall. That’s water backing up behind the gutter, and it means the drip edge or the gutter’s back lip has failed. The water running behind the gutter saturates the fascia and invites rot into the roof decking’s edge.
- Separated seams at the miters and end caps. Fort Lauderdale’s heat cycle expands and contracts aluminum every single day, and 15-year-old sealant has given up. A separated miter leaks at the exact point where the gutter makes a turn, often right above a doorway or a garage door where you actually notice it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a typical single-story Fort Lauderdale home, expect to pay between $1,200 and $2,600 for a complete IKO-matched gutter replacement, including tear-off of the old runs, new .032 aluminum K-style gutters, downspouts, hangers spaced at 24 inches, and sealed miters. Two-story homes run higher because of jacks and ladder staging, and homes with tile roofs add complexity since we reposition the roof’s drip edge carefully around the tile overhang. Here’s the line-item reality we put in writing before any work starts:
- Gutter removal and disposal: $2 to $3 per linear foot
- New .032 aluminum gutter, installed: $5 to $7 per linear foot
- Downspouts (replaced or reused, our call on-site): $45 to $90 each
- Fascia repair, when the board is soft: $6 to $10 per linear foot, priced only after we open it up and show you the rot
- Written warranty on the gutter work itself: 365 days, backed by Mercer Roofing’s Done Right Promise. If it’s not right within the year, we make it right.
Every estimate is a written line-item price, not a handshake and a hope. You’ll know exactly what it costs before our crew unloads a single piece of aluminum.
DIY or Call Us?
There are a few things worth checking on your own before you pick up the phone. Walk the perimeter after the next storm and note which corners overflow. Look for fastener heads backing out of the fascia. Clean out any debris dams you can reach from the ground with a garden hose and a gutter scoop on an extension pole. What you shouldn’t do is get on a ladder and start loosening hangers to “fix the slope.” Gutter work means standing at the roof edge, often on the second story of a Fort Lauderdale home, and reaching out past your center of gravity while holding a drill. That’s how homeowners end up in the ER with broken wrists and worse. The same goes for removing a section of gutter that’s been partially torn loose by a storm: it’s heavier than it looks once water and debris are in it. If the sag is pronounced, the slope is clearly off, or the fascia is visibly pulling away, call us at (754) 354-1224. We’ll put eyes on it, tell you honestly whether a repair will hold another five years or whether the whole run needs replacing, and write the price down before anyone climbs a ladder.
FAQs
In Fort Lauderdale’s salt air and intense UV, .027-gauge aluminum gutters typically last 12 to 18 years before pinholes and seam failures set in, while .032-gauge runs commonly reach 20 to 25 years with basic cleaning once or twice a year. Homes within a few blocks of the ocean should expect the shorter end of that range. Call us at (754) 354-1224 and we’ll tell you honestly which gauge you currently have and what it means for the years ahead.
Yes, in many cases. A single separated seam, a loose hanger run, or a downspout elbow with a crack can usually be repaired for $150 to $400, and we’ll write that repair up with the same 365-day guarantee we put on every job. The tipping point is when the aluminum itself is pitted, the slope has failed across more than one section, or the fascia behind the gutter is soft. At that point, repairing buys you less than replacing. Call (754) 354-1224 for a free estimate and we’ll show you what we see.
Most Fort Lauderdale gutter replacements on a single-story home are completed in one day, including tear-off, new gutters, downspouts, and a full clean-up with a magnet pass for loose screws. Two-story homes or homes with significant fascia rot typically run a day and a half. We’ll give you a written timeline in the estimate so you know exactly what to expect.
We stock 5-inch and 6-inch K-style aluminum profiles, hangers, end caps, miter pieces, and downspout sections on our trucks, so we can match most IKO roof systems the same day we come out. If your home has an older 4-inch profile or a specialty color, we order it and typically have the material in 2 to 4 business days. We’ll tell you which situation you’re in before you spend a dime.
If you’re tired of watching water pour over your gutters every time a Fort Lauderdale storm rolls through, call (754) 354-1224. We’ll schedule a free estimate, send you the name and photo of the technician who’s coming to your door, and put the entire job in writing before any work begins. A good roof shouldn’t be something you think about, and the same goes for the gutters hanging off it.
Written by Grant Whitlock, Owner, Mercer Roofing Co Fort Lauderdale at Mercer Roofing Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.